For further information, send an email to ICT perspectives. Thank you for your interest in the Digital Marketing’s blog. If you want joining the chat, the administrator is talking with you as soon as possible when he’s online.
Social Networks links
|
GE RSS READER EN | IT
- Harward Business Review
- EE|Times
- All About Circuits
- CompTIA
- John Hopkins Applied Physics Laboratory (APL)
- USA FDA press realeases
- International Atomic Energy Agency
- International Renewable Energy Agency
- European Environment Agency
- ITER.ORG
- Taylor & Francis
- Forum PA
- Elettronica Open Source
- Corriere Comunicazioni
- La Repubblica | Tecnologia
- Zero Uno Web
- Pagamenti Digitali
- Agenda Digitale
Sure, you could just argue with them. But if you have to work together, here are more productive ways for everyone to win.
Of all the bad bosses out there, one of the most common–and most painful to work for–is the one who’s plagued by doubt. Here’s how to deal with them.
They’re not being a jerk on purpose, and if you can understand what motivates them you’ll find a better way to co-exist, and maybe even thrive.
Should you always be looking for another job, never make a lateral move, or be sure to stay at a job for two years? There's a lot of conflicting advice out there. HBR's Amy Gallo helps you sort the myths from the facts.
Accenture CEO Julie Sweet on the Most Important Skill Job Seekers Need Today
DDR5’s architecture allows for more granular security mitigation and power management.
The post DDR5 Gets More Security, Power Management Features appeared first on EE Times.
NANO Nuclear Energy CEO James Walker highlights the company's ambitious plans to establish a vertically-integrated nuclear fuel business.
The post Microreactors Offer Advancements in Nuclear Energy appeared first on EE Times.
The program would make several awards of about $150 million per research area.
The post $1.6 Billion CHIPS Subsidy Boosts Advanced Packaging in U.S. appeared first on EE Times.
Latimer was intentionally designed to be more inclusive in its search results compared to other LLMs.
The post LLM Seeks to Cut Black and Brown Bias appeared first on EE Times.
The CHIPS Act has spurred regional cross-border collaboration in Eastern Canada.
The post Canada Bolsters NY Semiconductor Corridor appeared first on EE Times.
The 2024 Olympic Games officially start today. The games may be an athletic competition, but they rely on cutting-edge technology to ensure safety and accuracy in the arena and entertainment worldwide.
NXP, Infineon, MediaTek, and Onsemi are joining hands with automotive OEMs to target systems ranging from digital cockpits to traction inverters.
With more carriers comes more concerns about bandwidth—something Guerilla RF addresses with its newest power amplifier.
MEMS technologist Nanusens is putting its RF digitally tunable capacitors (DTCs) to new use in RF front ends to help 5G and 6G take off.
In this article, we explore the advantages of introducing an air gap to the magnetic core of an inductor.
How will the CrowdStrike outage impact businesses and consumers in the near future? Learn more about the need for oversight and preparation for companies and individuals alike as we explore the outage. Plus, hear insights from CompTIA’s VP of Industry Research, Seth Robinson.
Data science is a rapidly growing career field. Here are four data-related job roles you’ll be prepared for with CompTIA DataX training and certification.
Marketing development funds (MDF) are a great opportunity to engage with vendors on campaigns to find new clients—if you use them effectively.
Learn why CompTIA CertMaster Perform is a great addition to your training organization. You’ll uncover the many benefits, innovative features, and more. Plus, you’ll see how it compares to other CertMaster products.
CompTIA Community members save on leading CompTIA vendor-neutral certifications to train their tech teams for less.
Vice Chief of Naval Operations Adm. Jim Kilby visited APL on July 24 along with members of his staff.
Over 250 scientists, practitioners and policymakers recently gathered on Johns Hopkins APL’s campus for the Third National Workshop on Marine Environmental DNA to launch a new federal aquatic eDNA National Strategy, discuss state-of-the-art eDNA science, and identify implementation opportunities that will realize the full potential of eDNA as a tool to monitor aquatic ecosystems.
A new Johns Hopkins APL-led study using NASA’s Webb telescope suggests carbon dioxide and similar molecules on Uranus’ moon Ariel may be emerging from inside the moon, raising questions about the moon’s geologic activity and potential as an ocean world.
APL computational physicist and aerospace engineer Paul Burke will join some of the country’s most promising early-career engineers to discuss pioneering research and technical advancements at the National Academies Frontiers of Engineering Symposium.
APL researchers are accelerating multi-principal element alloy (MPEA) design by creating complex microstructures that provide composition information from only a few samples. The researchers developed a design capability to synthesize 17 unique MPEA compositions and present characterization data on over 7,000 unique data points.
The U.S. Food and Drug Administration is providing an at-a-glance summary of news from around the agency.
The U.S. Food and Drug Administration is providing an at-a-glance summary of news from around the agency.
The U.S. Food and Drug Administration is providing an at-a-glance summary of news from around the agency.
FDA, FTC issue warning letters to companies for selling food products containing delta-8 THC that mimic chips, candies and snacks from popular national brands
The U.S. Food and Drug Administration is providing an at-a-glance summary of news from around the agency.
The nuclear safety and security situation at the Zaporizhzhya Nuclear Power Plant (ZNPP) remains highly challenging during the military conflict, including efforts to ensure adequate maintenance of key safety systems and other vital equipment, Director General Rafael Mariano Grossi of the Interna
Progress is being made towards a global nuclear liability regime for nuclear damage, participants heard at the Fourth Meeting of the Contracting Parties and Signatories to the Convention on Supplementary Compensation for Nuclear Damage (CSC), held at the IAEA’s headquarters in Vienna, Austria last month.
The IAEA and the United Nations Office for South-South Cooperation will launch a new series of joint activities to enhance collaboration, following an agreement signed during the recent UN High Level Political Forum in New York.
The IAEA and Italy – the current Group of Seven presidency – will co-host the inaugural ministerial meeting of the World Fusion Energy Group later this year to inject further momentum into intensifying global efforts to develop a potentially clean, safe and limitless source of energy.
Canada will recycle disused radioactive sources from Thailand in order to support innovative cancer treatments, as part of an international IAEA initiative.
Turning the COP28 pledge into reality and increasing renewable power capacity dramatically calls for urgent policy interventions.
The Renewable Energy Statistics 2024 released by the International Renewable Energy Agency (IRENA) today shows that despite renewables becoming the fastest growing source of power, the world will now have to grow renewables capacity at a minimum 16.4% rate annually through 2030.
The International Renewable Energy Agency (IRENA) invites students and young professionals from diverse backgrounds to join GROWTH@IRENA, a comprehensive five-week training program.
The 2024 International Energy Workshop turned out to be a pivotal event, enriching the global energy modelling community with new ideas essential for navigating the challenges and opportunities in the energy sector.
The Global Renewables Summit, the first-ever high-level public-private summit, will be held in New York from 23-25 September on the margins of the 79th UN General Assembly High-Level Week to discuss the progress, opportunities, and challenges of tripling renewable energy globally by 2030.
Growing transport volumes have been driving Europe’s road transport emissions up in the past two decades. A European Environment Agency (EEA) analysis, published today, shows how total greenhouse gas emissions from both passenger cars and heavy goods vehicles have increased in Europe, despite better engine efficiency and use of biofuels.
Breaches of EU air quality limits for nitrogen dioxide across Europe were predominantly due to road traffic, while domestic heating lay behind the majority of exceedances for particulate matter, according to a European Environment Agency (EEA) assessment on air quality plans published today.
Textile consumption in Europe has on average the fourth highest impacts on the environment and climate, following consumption of food, housing and mobility. Ahead of the expected European Union (EU) strategy for sustainable and circular textiles, the European Environment Agency (EEA) published today two briefings that look at measures to reduce those impacts, including on resource use, greenhouse gas emissions and microplastic pollution.
The European Green Deal acknowledges the crucial role of taxation in Europe’s sustainability transition. A new European Environment Agency (EEA) briefing, published today, shows that revenues from environmental taxes can support transition investments but future revenue streams from these taxes will erode as European Union (EU) environmental and climate policy objectives are achieved. The relative share of environmental taxes to total tax revenues has also declined in the past two decades.
Extreme weather events like storms, heatwaves and flooding accounted for economic losses of around half a trillion euros over the past 40 years and led to between 85 000 and 145 000 human fatalities across Europe. Less than one-third of these losses were insured, according to a European Environment Agency (EEA) analysis of economic losses and fatalities from weather and climate-related events, published today.
Look east, look west ... tokamak projects are underway in different parts of the world. All of them are benefiting from and complementing the pioneering work already done—and ongoing—at ITER. The ITER Private Sector Fusion Workshop in May was the occasion to showcase some of the different approaches. First to take the floor during a panel on tokamaks was Alex Creely of Commonwealth Fusion Systems (CFS), a startup spun out of the Massachusetts Institute of Technology. CFS is currently building the SPARC tokamak, which is based on the same tokamak physics as ITER, but which utilizes new, high-temperature superconducting (HTS) magnets that enable much higher magnetic fields and therefore smaller tokamaks. 'In the early days of ITER, it was seen as the only viable path to a power plant,' said Creely. 'There are now other viable paths, however, and fusion has become a multi-polar endeavor.' CFS has already built a demonstration non-insulated toroidal field coil and tested a 20.8 Tesla HTS magnet at 20K operating temperature, storing 110 MJ of energy in 270 km of HTS tape. CFS intentionally operated this to the point of failure in order to validate its models. Creely underscored some of the challenges ahead that the global fusion community needs to solve such as blanket and heat extraction, as well as the need for durability and reliability for commercial power plants. 'ITER has the opportunity to become part of a vibrant multi-polar fusion research community, adapting to the emergence of the new private fusion industry.' He went on to stress CFS's strong support of open scientific discourse around plasma physics, and its interest in sharing physics knowledge with ITER and other fusion endeavors—both through publication and through meetings of peers. 'CFS would like to see wider distribution of the documents and tools that ITER has developed. We would be very interested in gaining access to existing ITER documents and not just the planned ITER Design Handbook, which won't be published for some time. There is a lot of existing knowledge that we would be happy to benefit from right now.' The second panel participant was David Kingham from Tokamak Energy, a company founded in 2009 as a spin-off from the UK Atomic Energy Authority (UKAEA). A US subsidiary, Tokamak Energy Inc, was established in 2019, and is one of the companies selected for the US Department of Energy's bold decadal vision for fusion energy. 'Tokamak Energy is the only private fusion company with over a decade's experience developing the two technologies that offer the most efficient and commercially attractive route to fusion energy—the compact spherical tokamak and HTS magnets,' said Kingham. He emphasized how HTS is a real game changer for fusion, noting that Tokamak Energy had achieved a record 24 Tesla at 20K. He also pointed out how important the company's work on HTS magnets has been in developing technology for applications well beyond fusion. 'The ability to generate intense magnetic fields in a relatively compact size makes HTS magnets attractive for applications including magnetic levitation, energy storage and lightweight, powerful electric motors and generators. Future applications could include magneto-hydrodynamic propulsion; mineral separation; proton/hadron beam therapy; particle accelerators; and space propulsion. These applications, and more, can be addressed because our magnet engineering and construction, developed for the hugely demanding requirements of fusion energy, produces magnets that are robust, compact, exceptionally powerful and easy to cool—to a typical operating temperature of 20K.' Kingham stressed the importance of ITER's body of work, citing publicly available information on the design of ITER including a grand database of tokamak experimental data, which was useful to conceptual design studies for spherical tokamaks, and advancements in tritium handling and fuel breeding systems. 'ITER has also validated the performance of many important materials and stimulated the development of supply chains for materials and other enabling technologies.' Kingham hopes to continue to benefit from ITER knowledge—including (good and bad) lessons learned and more detail about materials selection, and through the support of bi-directional staff secondments. Panelist David Weisberg described research at General Atomics, which operates the DIII-D tokamak for the US Department of Energy. Whereas early tokamak designs, starting in the 1960s, were circular in cross-section, scientists at General Atomics developed the 'doublet,' a configuration with an elongated hourglass-shaped plasma cross-section. The Doublet I, II, and III tokamaks in the 1970s and 1980s showed that this approach allowed for a hotter and denser stable plasma. The doublet concepts evolved into the D-shaped plasmas universally seen in tokamaks today—including ITER—making General Atomics instrumental in leading this fusion research innovation. Today, General Atomics is a major player in ITER manufacturing (central solenoid, diagnostics) but also an important player in the private-sector push forward for fusion, with specific expertise in developing and fabricating large-scale superconducting magnets for fusion applications. 'Private fusion companies are more nimble and can move more quickly than large public programs,' said Weisberg, 'but we do so at increased programmatic risk. We believe that ITER can play an important role in reducing risk for the private sector by becoming the knowledge base for tomorrow's fusion industry. For example, General Atomics is focusing on reducing risk through technology development that is informed by integrated facility design studies. ITER is already a world leader in this approach, and so we believe there is an important opportunity for ITER to disseminate this knowledge, both through the ITER Design Handbook as well as through person-to-person education.' Calling the design and construction of ITER 'singular accomplishments that have generated a wealth of knowledge,' he said that ITER is closing fusion technology gaps and raising technology readiness levels. ITER 'has already solved many of the integration challenges that a fusion pilot plant will face' but he believes ITER can do more. 'The people behind the ITER design decisions are the most valuable resource for the private sector. The ITER Organization could expand its education efforts to include seminars, workshops, and summer schools for future fusion developers. And it could host industry partners on site to facilitate knowledge transfer, because in-person collaboration is the best way to pass on programmatic and development skills.' Minsheng Liu from China's ENN Energy Research Institute agrees. 'Good examples of how ITER can help include knowledge-sharing, such as the theory and modelling resources delivered by the ITER integrated modelling and analysis suite (IMAS), and the co-development of key technologies, such as negative-ion based neutral beam injector (N-NBI) technology.' Between 2018 and 2022, Liu's group designed and built EXL-50, China's first medium-sized spherical torus experimental device, which established the basis of spherical tokamak proton-boron fusion. In 2022, ENN began to upgrade to EXL-50U and design a new device, EHL-2—a spherical torus R&D platform to tackle key proton-boron fusion challenges including the much higher temperatures needed. The next step—Phase II—will be EHL-3A & 3B, which aim to improve parameters and overcome the engineering constraints for scaling up to a fusion reactor. Phase III will be the engineering and commercial demo, which will also focus on reducing costs. Liu joined the other speakers in emphasizing the importance of cooperation and collaboration in the fusion community and the value of learning by doing, drawing from expertise in fusion, high-energy particles, laser and materials. He said that ENN prioritized engaging experts from universities, laboratories, industries, power companies and private enterprises. Liu also highlighted the importance of digital intelligence in fusion research. 'Through intelligent simulation design, operation control, and experimental analysis of the spherical torus device—integrating physics, diagnosis, and control—we can help to expedite device design, enhance device design reliability, accelerate analysis and the comprehension of experimental results, and accomplish intelligent device control. We can digitize actual experiments and perform them on the computer. Our virtual, intelligent spherical torus experimental platform is flexible, capable of intelligent evolution, and able to extrapolate and predict without being constrained by current engineering technologies.' During the Q&A session following the presentations, all four speakers agreed that one of the key problems facing the industry is the shortage of engineers, suggesting that more funding for training was needed both in universities and public companies. 'But students won't get involved if the industry doesn't exist, if the finish line isn't in sight,' said Weisberg. 'So we really need to bootstrap and to make this happen.' And that, surely, is another way ITER can help.
Just like the ITER worksite, drone photography is also making progress. This view of the ITER platform is the sharpest and most detailed of all those we have published over the past decade. We have added labels and captions to showcase the ongoing work, some of it spectacular and visible, some performed in the depths of the buildings. 1 — Tokamak Building and Assembly Hall: As repair operations on vacuum vessel #7 and #6 are nearing completion in the Assembly Hall, the installation of heavy electro-mechanical equipment in the adjacent Tokamak Building and Tokamak assembly pit is mobilizing approximately 300 workers. Among the systems and structures being installed: piping for the cooling water system, platform construction in the drain tank room and in the L4 'vault', fuelling equipment, etc. 2 — Former Cryostat Workshop: The 5,000-square-metre workshop where the four sections of the ITER cryostat were assembled and welded now hosts the repair activities on vacuum vessel sector #8 and some thermal shield panels. 3 — Poloidal field coil winding facility: In this mighty European factory, four of the largest ITER poloidal field coils, ranging in diameter from 17 to 24 metres and weighing 200 to 400 tonnes, were manufactured and cold tested over a period of approximately ten years. The 49-metre-wide, 257-metre-long facility is now partially devoted to thermal shield panel repair and will host the toroidal field coil cold test facility. 4 — Coil storage: Whether D-shaped or ring-shaped, the ITER superconducting coils are massive components that, ahead of their installation in the Tokamak assembly pit, require a large amount of storage space. 5 — Cryobridge: In order to reach clients inside the Tokamak Building, cooling fluids produced by the ITER cryoplant flow through many kilometres of highly sophisticated piping called cryolines. Departing from and returning to the cryoplant, the cryolines must pass over an industrial bridge more than 10 metres above the ground—the cryobridge. The installation of cryoline spools is approximately 50% complete. 6 — Fast discharge units: In the case of a sudden loss of superconductivity, an event called a quench, a massive quantity of energy (~ 41 GJ), and hence of heat, will need to be extracted from the magnets. This is the role of the fast discharge unit resistors located in these two buildings. The exhaust ducts, connected to a central chimney, are being installed. 7a & 7b — Cocooned cryostat sections: Pending their installation in the Tokamak pit, the ITER cryostat upper cylinder (7a) and top lid (7b) are safely stored outdoors in protective cocoons. 8 — Heat rejection system: The refreshing sound of water cascading down the cooling cells is the newest addition to the everyday noise of the construction site. The heat rejection system is being commissioned in parallel with the cryoplant, whose compressors already generate quite a generous amount of heat that needs to be evacuated. 9 — Control Building: The brain that commands the various facilities spread over the platform occupies a 3,500-square-metre, three-storey structure providing space for control and server rooms, offices, meeting rooms and support facilities. All cubicles (numbering close to 100) are now in place and approximately half of the required connections to the installation's systems have been installed. 10 — Neutral beam power supply installation: Hosted in two buildings, the neutral beam power supply is a unique electrical installation that will accommodate an array of transformers, generators, rectifiers, inverters and other exotic electrical devices designed to feed 1 MeV ultrahigh voltage to the neutral beam plasma heating system. The first 66kV transformers should arrive at the end of the year. 11 — Cryoplant: In order to deliver cooling fluids to the machine, ITER operates one the largest cryoplants in the world. The third and last 'train' of megawatt-class helium compressors has recently been turned on. Commissioning of the cryoplant is now 30% complete. 12 — Diagnostics Building: Intense work is underway in the five-storey Diagnostics Building to install the fibre optics needed for the flow of data between instruments near the plasma and the back-end diagnostic systems. 13 — Radiofrequency Building: This building will house the equipment needed by the radio-wave-generating electron cyclotron resonance heating (ECRH) system. Seven and a half years after the start of building construction, control cubicles are being equipped, supports are being built and oil collectors installed to prepare for the installation of the first gyrotrons. See the gallery below for a few more details on work underway.
The Fusion Industry Association has released its 2024 Global Fusion Industry Report. The report, which surveyed 45 companies, found that the fusion industry has attracted over USD 7.1 billion in investment, with USD 900 million in new funds since last year. Total public funding increased by 57% in the last 12 months to USD 426 million, showing that governments increasingly see public-private partnerships as central to making commercial fusion a reality. It also showed the United States leading commercial fusion, with 25 companies, followed by the United Kingdom, Germany, Japan, and China. Additionally, employment in private fusion firms grew by 34% to over 4,000. More information is available here.
Volume 8, Issue 2, June 2024, Page 149-166<br/>. <br/>
Volume 8, Issue 2, June 2024, Page 167-188<br/>. <br/>
Volume 8, Issue 2, June 2024, Page 189-207<br/>. <br/>
Volume 8, Issue 2, June 2024, Page 208-230<br/>. <br/>
Volume 8, Issue 2, June 2024, Page 280-300<br/>. <br/>
Come vincere la scommessa della sanità territoriale? Ne abbiamo parlato il 10 luglio scorso a Firenze, in occasione del FORUM PA CAMP Toscana, il nostro format di incontro e confronto dedicato agli attori locali dell’innovazione e organizzato in collaborazione con Dell Technologies e Intel. Focus su telemedicina e Connected Care, intelligenza artificiale in sanità e modelli e standard per l’assistenza territoriale
L'articolo Le nuove frontiere della sanità territoriale: ecco il racconto dal FORUM PA CAMP Toscana proviene da FPA.
Nel marzo scorso era uscito un Executive Summary, dai giorni scorsi è online anche il testo integrale della “Strategia Italiana per l’Intelligenza Artificiale 2024-2026”. Il documento, pubblicato dall’AgiD e dal Dipartimento per la trasformazione digitale, è il risultato del lavoro di un Comitato di 14 esperti istituito per supportare il Governo italiano nel percorso di definizione di una normativa nazionale e delle politiche sull’IA. La messa online del documento avviene in un momento particolarmente intenso, vista anche la recente pubblicazione dell’AI Act sulla Gazzetta Ufficiale dell’UE e l’inizio delle audizioni in Senato sul DDL italiano in materia. Vediamo insieme cosa prevede in particolare la Strategia nella parte dedicata alla PA
L'articolo Strategia italiana per l’intelligenza artificiale: le sei azioni chiave per la PA proviene da FPA.
Due nuove puntate per “Ricomincio da tre. Dialoghi sull’innovazione”, la rubrica di FPA in collaborazione con Adobe che vede, in ogni appuntamento, un confronto su un tema di innovazione a partire da tre domande o parole chiave estratte a sorte. Il tema guida di queste due puntate è la "digitalizzazione, automazione e protezione dei servizi documentali per il cittadino e per la PA". A parlarne negli studi FPA: Ettore Sala, Capo Dipartimento per l'Innovazione Tecnologica della Giustizia (DIT); Antonella Negri, funzionario architetto, Istituto Centrale per la Digitalizzazione del Patrimonio Culturale - Digital Library, Ministero della Cultura; Paolo Conti, Head of Government Italy Adobe. Conduce la puntata, Michela Stentella
L'articolo “Ricomincio da tre | seconda e terza puntata”: quando i documenti diventano digitali, cosa cambia per PA e cittadini proviene da FPA.
La sfida della cybersecurity ai crimini informatici sta vivendo un’escalation. Di pari passo con le maggiori tecnologie di contrasto, aumentano il numero di attacchi e la loro complessità. A spingere le organizzazioni criminali ad alzare il tiro, oltre a motivazioni geopolitiche, anche il business dei riscatti e delle criptovalute. Si calcola che nel mondo l’impatto del cybercrime nel 2025 sarà di 10,5 trilioni di dollari. Tra i bersagli più colpiti anche in Italia, grandi aziende e pubbliche amministrazioni. Preoccupano la vulnerabilità della sicurezza e della riservatezza di dati e informazioni sensibili, oltre i potenziali disservizi e disagi per cittadini e dipendenti delle PA colpite. La differenza la fanno barriere di difesa, procedure e tecnologie di ripristino. L’esperienza di Veeam sulla resilienza informatica
L'articolo Cybersecurity, aumentano gli attacchi alla PA: cos’è il ransomware as a service proviene da FPA.
L’Intelligenza Artificiale sta entrando sempre più nell’elettronica di largo utilizzo, a cominciare dagli smartphone. L’evoluzione di app e tools consente con pochi click di tradurre testi, fare ricerche e di avere un vero e proprio assistente che semplifica le nostre attività. La ricerca Trend Radar di Samsung e Human Highway rivela che tra gli italiani cresce la fiducia verso l’Intelligenza artificiale e che ne percepiscono i potenziali benefici anche in termini di servizi. Gli scenari di applicazione sono pressoché illimitati e a beneficiare delle funzionalità “aumentate” di device mobili sempre più potenti e flessibili sarà necessariamente anche tutto il personale operativo delle PA
L'articolo Per il 54% degli italiani l’IA sugli smartphone migliorerà la vita. Come può cambiare anche la PA proviene da FPA.
Le estati sempre più torride portano con sé una serie di sfide per le batterie delle auto elettriche, causando potenziali malfunzionamenti, riduzioni della durata e persino danni permanenti. Questi problemi non solo peggiorano le prestazioni del veicolo, ma ne compromettono anche l'affidabilità generale. Proprio come il freddo, anche il caldo estremo rappresenta una minaccia significativa per le batterie al litio, cuore pulsante delle auto elettriche moderne. Le alte temperature possono influenzare negativamente qualsiasi dispositivo tecnologico, comprese le auto elettriche, esponendole a rischi di surriscaldamento quando vengono lasciate al sole per lunghi periodi. Questa situazione è particolarmente critica in un contesto in cui la diffusione delle vetture elettriche rappresenta una delle principali sfide e opportunità per la mobilità sostenibile. Tuttavia, il […]
AirGradient è un'azienda che progetta e produce dispositivi per il monitoraggio della qualità dell'aria professionali, accurati e di lunga durata, open source e open hardware. Questi monitor possono essere utilizzati per il monitoraggio della qualità dell'aria sia domestica che esterna. I monitor della qualità dell'aria di AirGradient sono progettati per essere economici e personalizzabili e sono dotati di un codice completamente open source in modo che gli utenti possano apportare facilmente modifiche. La natura open hardware permette anche di costruire in completa autonomia il proprio dispositivo personalizzato. In questo articolo andremo a descrivere come realizzare una versione base di questo dispositivo. Introduzione I dispositivi di monitoraggio di AirGradient sono dotati di sensori che misurano diversi parametri della qualità dell'aria come […]
Affascinato dall'idea di costruire un computer fai-da-te UT-88 degli anni '80 a 8 bit, Evgeny Adamenkov ha scelto di seguire un approccio più moderno, realizzando il suo remake con un Arduino Mega 2560, un RetroShield Z80, un display LCD 16x2 e una tastiera 4x4. Incuriosito dall'idea di costruire un computer fai-da-te UT-88 degli anni '80 a 8 bit, Evgeny Adamenkov ha optato per un approccio più moderno, realizzando il suo remake con un Arduino Mega 2560, un RetroShield Z80, un display LCD 16x2 e una tastiera 4x4. Questo progetto non solo preserva l'essenza del computer originale, ma introduce anche una maggiore facilità d'uso grazie alla programmabilità dell'Arduino. Evgeny ha eliminato la necessità di saldature complesse e componenti vintage, rendendo il […]
La robotica educativa rappresenta una delle più avvincenti e potenti modalità di apprendimento contemporaneo, in grado di integrare efficacemente i principi di STEM (Scienza, Tecnologia, Ingegneria e Matematica) nelle aule di tutto il mondo. In un'era dove le competenze digitali sono diventate imprescindibili, l'adozione di programmi di robotica educativa non solo arricchisce il bagaglio conoscitivo degli studenti, ma stimola anche la creatività, la capacità di problem solving e il lavoro di squadra. In questo articolo, esploriamo come la robotica educativa sta rivoluzionando l'insegnamento delle discipline STEM e delineando le sue potenzialità per il futuro dell'educazione. La robotica educativa coinvolge gli studenti in attività pratiche e interattive, permettendo loro di costruire, programmare e manipolare robot. Questo approccio hands-on favorisce un apprendimento […]
Conosciamo tutti il giroscopio e la sua utilità negli smartphone? Si tratta di piccoli dispositivi che sono il vero futuro della tecnologia mobile. Questa breve guida ha lo scopo di offrire una panoramica dettagliata sull'importanza dei giroscopi negli smartphone, evidenziandone le funzionalità e gli utilizzi pratici. L'argomento è di grande interesse per gli appassionati di tecnologia e per coloro che desiderano comprendere meglio come le tecnologie avanzate migliorano la nostra vita quotidiana. I giroscopi sono strumenti tecnologici avanzati utilizzati per misurare e mantenere l'orientamento di un oggetto nello spazio. Basati sul principio della conservazione del momento angolare, i giroscopi rilevano i cambiamenti di orientamento rispetto a un asse fisso. Questi dispositivi sono costituiti da un rotore in rapida rotazione, il […]
Gateway, telecamere smart e un software AI per individuare situazioni di criticità fino a una distanza che può raggiungere i 5 km di raggio e 80 km quadrati. L’iniziativa frutto della partnership con Legambiente. Suigo: “Le nostre infrastrutture digitali e condivise sono sempre più al servizio dei territori e sentinelle a tutela della biodiversità, prezioso patrimonio da proteggere”
L'articolo Rilevare gli incendi dalle torri di Tlc con l’intelligenza artificiale: parte dall’Abruzzo la sfida Inwit proviene da CorCom.
Ha una quota del 5,5% superiore al 5% di Iliad che però guadagna l'1,6%. Fastweb, WindTre e Vodafone perdono rispettivamente il 2,3%, l'1,1% e lo 0,4%. Tim sale di due punti. In aumento anche il peso degli operatori “minori” che cubano circa l’8%
L'articolo Ftth, Sky Italia corre veloce ma Iliad è alle costole proviene da CorCom.
Passo significativo nella crescita e nel rafforzamento della leadership dell'azienda guidata da Giacomo Mariotti. Enrico Dalle Molle e Paolo Grotto, i due soci amministratori di Arket, entreranno a far parte del management team dell'area Digital di Bluenext
L'articolo Trasformazione digitale delle pmi, Bluenext acquisisce Arket per 12 milioni proviene da CorCom.
Dopo cinque anni di negoziati oltre 90 Paesi della World Trade Organization hanno trovato la quadra. Messi nero su bianco principi e indicazioni per colmare i vuoti normativi, uniformare contratti e autenticazione, digitalizzare i processi doganali e spingere l’interoperabilità dei dati. Riflettori in particolare sulle piccole e medie imprese. Via al Digital trade agreement Ue-Singapore, è il primo nel suo genere
L'articolo E-commerce, primo accordo mondiale per standardizzare regole e procedure proviene da CorCom.
A disposizione delle amministrazioni pubbliche servizi specialistici per supportare i progetti di trasformazione coerentemente con i principi guida del piano triennale Agid e con gli obiettivi Pnrr. Pacchetti modulari acquistabili in funzione della complessità e dello stato dell’arte. E template che descrivono i contenuti minimi che la PA otterrà come output del servizio acquistato
L'articolo Digital transformation della PA, via al nuovo contratto Consip da 400 milioni proviene da CorCom.
Il nuovo motore di ricerca di OpenAI, potenziato dall’intelligenza artificiale, sfida Google e punta a un mercato che vale 300 miliardi di dollari. Per ora sarà limitato a un numero ristretto di utenti, circa 10mila: chi intende provarlo può iscriversi a una lista d’attesa
La candidata dei Democratici ha raccolto oltre 1 milione di follower in poche ore e ha decisamente cambiato il tono della sua comunicazione, molto più aggressiva nei confronti di Trump
La chiamata “alle armi” del “papà di ChatGpt” e amministratore delegato di OpenAI: “È tempo di agire e di impedire a regimi autoritari come Russia e Cina di superare i paesi democratici nella corsa all’intelligenza artificiale”
L’intelligenza artificiale generativa offre grandi promesse ma anche sfide significative per i CIO, in particolare nella gestione delle spese e nella selezione delle informazioni appropriate. Affrontare questi aspetti è cruciale per trasformare le potenzialità della GenAI in valore concreto per il business
L'articolo GenAI, dalla sperimentazione alla scalabilità: al centro la gestione di costi e dati proviene da ZeroUno.
Partendo dall’ABC della protezione in cloud, si può capire come individuare gli strumenti più adatti alle proprie problematiche e imparare a scegliere quelli che ogni volta fanno al caso nostro. Non tutti svolgono gli stessi compiti
L'articolo CASB vs. CSPM vs. CWPP: triplo confronto per la sicurezza cloud proviene da ZeroUno.
Francesco Ciuccarelli, CIO & CTO di Alpitour World, racconta il viaggio della società nell'implementazione dell'AI, partendo dai primi chatbot fino alla creazione di AlpiGPT. Attraverso una strategia ben definita e l'adozione di metodologie Agile e DevOps, ecco come cambia la relazione fra IT e business
L'articolo Come usare l’AI generativa in azienda: l’esperienza di Alpitour World proviene da ZeroUno.
Ecosistemi integrati di dati e soluzioni, in grado di evolversi e scalare in funzione delle esigenze di business: ecco come il settore HVAC, un comparto che rappresenta una delle eccellenze del made in Italy, può affrontare lo scenario d’incertezza dell’economia globale. Il punto di vista di Luca Fantin, Head of sales della LOB SAP di Present
L'articolo Settore HVAC: per vincere le nuove sfide serve l’ERP in cloud proviene da ZeroUno.
Gli utenti dei servizi di intelligenza artificiale immettono informazioni relative alla propria persona o al proprio business, che in certi casi possono essere anche sensibili. Il problema del rispetto della privacy di queste informazioni è sempre più pressante, e ci sono diversi approcci per la tutela del nostro anonimato.
L'articolo Intelligenza artificiale e privacy: ci pensa la blockchain proviene da ZeroUno.
Il noto produttore di suole in gomma collabora con Adyen per integrare soluzioni di pagamento avanzate, migliorando l'esperienza di checkout e la gestione delle transazioni nel contesto Direct to Consumer
L'articolo Vibram e Adyen: accordo nei pagamenti per un’esperienza cliente migliore proviene da Pagamenti Digitali.
L'accordo amplia le possibilità per i clienti della banca di effettuare prelievi gratuiti fino a 250 euro giornalieri in diversi punti vendita nazionali, migliorando l'accessibilità e la comodità dei servizi bancari
L'articolo Intesa Sanpaolo e Mooney: nuove opportunità di prelievo gratuito per i clienti proviene da Pagamenti Digitali.
Introdotto Protezione del patrimonio, un innovativo strumento di sicurezza che utilizza l'autenticazione biometrica per proteggere i fondi degli utenti nei pocket, specialmente in situazioni di furto o smarrimento del dispositivo
L'articolo Revolut rafforza la sicurezza: nuova funzionalità contro i furti digitali proviene da Pagamenti Digitali.
La piattaforma britannica, specializzata in servizi bancari digitali per PMI, startup e liberi professionisti, ha ottenuto la licenza di Electronic Money Institution e punta a espandersi in Europa e in Italia
L'articolo wamo sbarca in Italia: nuovo round da 5 milioni di dollari e licenza EMI proviene da Pagamenti Digitali.
L'intesa mira a potenziare la piattaforma di ManoMano e a semplificare i pagamenti per i venditori del marketplace, favorendo la crescita del business sia a livello locale che internazionale
L'articolo Mangopay e ManoMano, alleanza per nuove soluzioni di pagamento per i marketplace proviene da Pagamenti Digitali.
L'intelligenza artificiale riflette i valori e i limiti dell'umanità, sollevando importanti interrogativi etici e filosofici. Analizzando le teorie evolutive di Konrad Lorenz e le riflessioni contemporanee di Shannon Vallor, si evidenziano i rischi di un rispecchiamento tecnologico che potrebbe compromettere la nostra creatività e capacità di innovazione
L'articolo IA specchio dell’umanità? I rischi di un riflesso distorto proviene da Agenda Digitale.
L'AI Act mira a prevenire la frammentazione normativa nel mercato interno. Esclude settori come difesa e sicurezza nazionale, ma lascia spazio a integrazioni nazionali in ambiti specifici. Il nuovo disegno di legge italiano propone norme per l'uso dell'AI nella sanità, bilanciando innovazione e protezione dei dati personali
L'articolo AI e dati sanitari: cosa cambia con il nuovo Ddl italiano proviene da Agenda Digitale.
Il Fascicolo Sanitario Elettronico 2.0 rappresenta un'evoluzione significativa nel settore sanitario italiano. Grazie al PNRR, il FSE 2.0 migliora l'accesso ai dati clinici, favorendo diagnosi personalizzate e ricerca scientifica. L'adozione richiede formazione su più livelli e superamento di sfide tecniche e operative
L'articolo Dal FSE 1.0 al 2.0: verso una sanità digitale integrata e personalizzata proviene da Agenda Digitale.
A luglio 2024, il ministro Valditara ha vietato l'uso degli smartphone nelle scuole primarie e secondarie di primo grado. Questo provvedimento ha sollevato polemiche riguardo all'autonomia scolastica e all'efficacia educativa di tale divieto, mentre le famiglie e gli educatori si interrogano su come affrontare l'uso dei dispositivi digitali tra i giovani
L'articolo Divieto di smartphone: se la scuola abdica alla sua funzione educativa proviene da Agenda Digitale.
L'automazione industriale può trasformare profondamente la produzione: ecco come funziona, quali sono le tecnologie coinvolte e in quali settori si può applicare
L'articolo Automazione industriale, cos’è: ecco le tecnologie all’avanguardia proviene da Agenda Digitale.
